| |
| Plate 1: |
Form of hand wheels and hand cranks, and valve identifications |
| " 2: |
Symbols used |
| " 3: |
Color identification of pipe lines, conduits, and tubes |
| " 4: |
Abbreviations used |
| " 5: |
General arrangement of vessel |
| " 6: |
Draining and trimming system |
| " 7: |
Regulating and torpedo compensating system |
| " 8: |
Fuel oil venting, sounding and test piping (longitudinal section) |
| " 8a: |
Fuel oil venting, sounding and test piping lcross section) |
| " 9: |
Fuel oil filling, transfer, and delivery system |
| " 10: |
Fuel oil compensating system (circulating water under pressure) |
| " 11: |
High pressure air system |
| " 12: |
Low pressure or service air system |
| " 13: |
Cooling-water system and anti-corrosion oil-circulating system; for ships with Krupp engines |
|
| " 13A: |
Cooling-water system and anti-corrosion oil-circulating system; for boats with MAN engines |
|
| " 13B: |
Cooling-water system and anti-corrosion oil-circulating system; for U93-U97 |
|
| " 14: |
(Left) Engine lubricating oil system, (Right) lubricating oil storage, sump and purifying system, for Krupp engines |
| " 14A: |
(Left) Engine lubricating oil system, (Right) lubricating oil storage, sump and purifying system, for MAN engines |
| " 15: |
Engine starting air and induction air (for Krupp engines) |
 |
|
|
|
| Plate 15A: |
Engine starting air and induction air (for MAN engines) |
| " 16: |
Flooding, venting, low pressure exhaust gas and emergency blowing systems |
| " 17: |
Blowing and emergency blowing systems for ballast, regulating and negative buoyancy tanks |
| " 18: |
Compartment ventilating and supply systems (emergency ventilating) |
| " 19: |
Ventilating diagrams for surface, submerged, running and charging conditions |
| " 20: |
Oxygen system |
| " 21: |
Fresh water, wash water, waste and sanitary systems |
| " 22: |
(Left) Evaporating and distilling system; (Right) voice tube system |
| " 23: |
Hydraulic system for operating periscopes |
| " 24: |
Steam heating system |
| " 25: |
Torpedo tube firing, venting, flooding and drainage systems |
| " 26: |
Lime-water (acid neutralizing) system (for battery compartments) |
| " 27: |
Arrangement of compartments and tanks, and tank capacities |
| " 28: |
Flooding and venting system for ballast and buoyancy tanks |
| " 29: |
Air starting gear for Krupp engines |
| " 29A: |
Air starting gear for MAN engines |
| " 30: |
Reversing gear for Krupp engines |
| " 30A: |
Reversing gear for MAN engines |
| " 31: |
Cross-sectional arrangements |
| " 32: |
Specifications for hose and connections for piping systems |
| " 33: |
Pumping plan |
| " 34 |
Vibration and noise absorbing mountings, starboard and port |
|
|
|
|
